02-02-2023, 07:25 AM
Caroma Toilet Cistern
|
02-02-2023, 07:43 AM
probably not much help but if you jump on youtube there are a bunch of videos about adjusting water levels - seems to be quite a few different types of them...
This world would be a perfect place if it wasn't for the people.
Sharesies | Buy Crypto | Surfshark VPN | Cloud Backup
02-02-2023, 10:37 AM
Can't help wondering why you would want to do that.
02-02-2023, 11:24 AM
Water is over-flowing .. a bit too high. Need to bring it down a little.
Simple reason.
02-02-2023, 11:58 AM
Change the washer in the top part of the valve shut-off, if it's like the one we have which is an older model then if it doesn't completely stop the flow the level keeps rising until it overflows.
It's quite a large flat floppy disk, Mitre 10 generally has them and can give advice on what may be the problem if you find the right person. That model you have shown is in advance of my knowledge.
It's not the least charm of a theory that it is refutable. The hundred-times-refuted theory of "free will" owes its persistence to this charm alone; some one is always appearing who feels himself strong enough to refute it - Friedrich Nietzsche
02-02-2023, 12:10 PM
(02-02-2023, 10:37 AM)driftwood Wrote: Can't help wondering why you would want to do that. a plumber I knew, when referring to the newer (4l full 2l half flush ) cisterns, said they don't always cope so well with "Man sized poos" - double flush might be required... This world would be a perfect place if it wasn't for the people.
Sharesies | Buy Crypto | Surfshark VPN | Cloud Backup
02-02-2023, 02:30 PM
(02-02-2023, 11:24 AM)Galaxy01 Wrote: Water is over-flowing .. a bit too high. Need to bring it down a little.We've had overflow problem in the past. It has occurred following plumbing work which has resulted in air getting to the pipes. That has caused sediment to be disturbed and bits of grit getting stuck in the valve system in the cistern. Running on after the cistern is full was the result. We're rural and on tank water so if you're in a similar situation or have had plumbing work done recently maybe worth pulling the mechanism to bits and checking for debris. |
« Next Oldest | Next Newest »
|
Users browsing this thread: 2 Guest(s)