Ubiquiti edgeemax router, any experts?

[Wainuitech]

The only time I had problems with Ubiquiti, was when we put in a new System, and attached 2 x48 port switches. The guy who was helping went into the router someplace ( I wasn't watching) and he went got ya ! There was something that had not been turned on from what I gather. ( not much help I know) Next thing the Switches lite up like a Christmas tree.

Found though on gowireless "In New Zealand we have two common methods of providing 1Gbps Fibre internet; PPPoE with VLAN 10 and DHCP with VLAN 10 (sometimes referred to as IPoE)."

Have you tried PPPoE instead  ??

Other wise give Gowireless a call, last time I had a problem they were rather helpful, pointed in the right direction

Their site GoWirless

Edited: Assume you have checked all the Settings for  2 degrees ??  AND do you have a Static IP or Dynamic ??

Settings

Yeah, 2degrees specify dhcp and vlan 10.
 There were a couple of other settings they quote too but don't see it on the configuration page, but there is probably something I've missed.
These were 802.2Q enabled and 802.1P =0
Might talk to gowireless tomorrow.
I'm guessing its something to do with vlan tagging,  etc.

Like most things it will be one thing missed ( or not known about) then when activated, all hell breaks loose