04-09-2024, 04:37 PM
I'll just concentrate on the ControlDemo2 for now.
That's the one that opens half and half.
It opens in a small window, and I run it as such but do stretch it out a bit.
My small (main) monitor is an Acer AL1917
Secondary is an Asus VG278HV
The onboard graphics are used.
Seeing as we weren't getting anywhere with this, I thought I'd better check all the cables etc.
This system is used mainly for programming and controlling radios and there are many cables.
The secondary monitor has been connected via VGA or DVI or HDMI depending on what I was doing at the time.
I couldn't actually remember which one it was currently using.
So, I've just tried all three, but it makes no difference to the problem.
This does have the HD Intel Graphics installed, but I don't think this would be a driver issue as it only effects the one program.
I have tried it with and without the tick for "Remember window locations etc."
That's the one that opens half and half.
It opens in a small window, and I run it as such but do stretch it out a bit.
My small (main) monitor is an Acer AL1917
Secondary is an Asus VG278HV
The onboard graphics are used.
Seeing as we weren't getting anywhere with this, I thought I'd better check all the cables etc.
This system is used mainly for programming and controlling radios and there are many cables.
The secondary monitor has been connected via VGA or DVI or HDMI depending on what I was doing at the time.
I couldn't actually remember which one it was currently using.
So, I've just tried all three, but it makes no difference to the problem.
This does have the HD Intel Graphics installed, but I don't think this would be a driver issue as it only effects the one program.
I have tried it with and without the tick for "Remember window locations etc."