28-03-2025, 08:31 PM
Well, after 20 days stable it crashed on me while shutting down with a memory management stop code.
I've taken out one of the RAM sticks and re enabled expo in the hopes that I won't have to wait 20 days for a crash (was daily with expo enabled if you recall).
What is really winding me up right now is the thought that if it works ok in single channel mode on both chips I still won't know if it's the RAM or the CPU but here's hoping one works and one doesn't.
Bit of a bitch to remove the other ram stick as it's under the air cooler.
Also just to note while one of the tools suggests overheating RAM hardware monitor has never shown it over 40c on either stick.
I've taken out one of the RAM sticks and re enabled expo in the hopes that I won't have to wait 20 days for a crash (was daily with expo enabled if you recall).
What is really winding me up right now is the thought that if it works ok in single channel mode on both chips I still won't know if it's the RAM or the CPU but here's hoping one works and one doesn't.
Bit of a bitch to remove the other ram stick as it's under the air cooler.
Also just to note while one of the tools suggests overheating RAM hardware monitor has never shown it over 40c on either stick.